What is commercial cleaning robots?
The robot is equipped with a workstation that can autonomously clean components such as dust pads and dirty water tanks without human intervention. After working for a period of time, it will automatically adjust the height of the cleaning component until it needs to be replaced.
What can do of this robot?
Sweeping
Clean all corners.The edge brush cleans the Corner and brings the garbage to the bottom center of the machine.The brush rolls the garbage into the dust box.
01
Dust Pushing
Quiet and gentle.Put down the dust pusher, wipe the floor, clean the floating dust. When the robot reaches the end of the area, the suction fan is turned on to dust up into the sewage tank.
02
Scrubbing
Clean liquid litter/stubborn stains.The floor brush brings clean water to the floor and then clean the floor.The Squeegee draws the sewage into the sewage tank.
03
Vacuuming
Deep clean carpet.The roller cloth and brush the garbage from the ground by turning it in reverse.The two types of garbage are separated by a partition, and large pieces of garbage go into the dust box.
04
Carpet mode for smarter cleaning
Auto-identification of carpets. The dual mode of sweeping-vacuuming. The robot will autonomously increase the vacuum power to clean thoroughly.
05
What you can get if buy this robot?
Clean the robot host
Self cleaning and cleaning can be achieved through settings.
Charging station
If the robot's battery level is below 15%, it can automatically return to the charging station for charging.
Intelligent workstation
After docking with the workstation, thecommercial cleaning robots can automatically add water and drain water.
Machine consumables
Including dust bags, water filter baskets, filters, edge brushes, sweeping brushes, rolling brushes, dust boxes, and more.
Contact now
How to use this robot?
1.
Download the client softwareAfter downloading, you need to log in to your account to view the robot tool function instructions and access historical data. Robots can be monitored and managed anytime, anywhere.
2.
Turn on and off the machineShort press the power button to turn on and off, long press the power button for 6 seconds to force shutdown, suitable for device unresponsive scenarios.
3.
Emergency brakingEmergency stop operation mode: directly press the emergency stop button. The device immediately stops all operational actions and enters a safe shutdown stateUnlock operation method: Rotate the emergency stop button clockwise until it pops up and resets.
4.
Add clean water.Manually add water. Manually inject clear water into the water injection port, up to a maximum of 17LAutomatic water addition method oneAfter docking with the workstation, the robot will automatically evaluate the water volume and add water before executing the taskAutomatic water addition method 2After the robot is docked with the workstation, users can click on "More" - "Auto Add Water" - "Start Adding Water" on the interface to add water to the robot
5.
Establish tasks.Operate on the program, click on "New Task", select the map of the cleaning area, create a cleaning plan and save it, name the cleaning plan and save it.
6.
Work plan.① Select cleaning task ② Select time mode ③ Select the time needed for cleaning ④ If cleaning is only done once. Please select a single task, such as cycle repetition task ⑤. Please select a specific time cycle and enter the specific start time of the task. After the setup is completed, the robot will work according to the set task plan.
7.
Start the task.Select Start Task on the homepage, choose the cleaning task to be executed from the list, and click Start Cleaning.
8.
Terminate the task.Click the pause button, enter the lock screen password, and click end task.
How to cleaning and maintenance this robot?
Dust bag
Open the internal cover, lift the dust bag, replace it with a new one, and reset it.
Water filter basket
After opening the cover plate, pull up the water filter basket, clean it, and put it back in place.
Dust box
Remove the maintenance cover and pull out the dust box outward.
Roll brush/sweep brush
After pressing, remove the roller brush and replace it with a new one.
Replace the water absorbing scraper
Remove the screws, remove the casing, and replace with new consumables.
Replace the dust push cloth
Separate the dust pushing plate shell and support frame, tear off the adhesive layer, and replace the dust pushing cloth with a new one.
